3-18
Maximus Reference Manual
MANU-MAXIMUS-02
Revision-02
ATS Setup Mode
Chapter 3: Monochrome Terminals
3.
The terminal now displays the
Confirm Password
prompt. Re-type the
password from the previous step then press the
enter
key.
4.
The terminal displays the
Re-Boot
prompt. Press the
enter
key to confirm and
re-boot the terminal.
Setup Host Connect
Set the network connection for terminals that use an Ethernet connection, so the terminal can
communicate across the local computer network.
1.
Press the
enter
key at the to
Setup Host Connect
prompt to access the host
connection options or press the
clear
key to proceed to the next item (
Setup
Smartcard
).
Confirm Password
You must re-boot the terminal immediately after changing/setting the password to “blank/
no-password” (pressing the
enter
key at both the
Enter Password
and
Confirm Password
prompts without typing anything in). If you press the
clear
key to cycle through the setup
menu parameters without rebooting the terminal may lock you out requiring you to contact
technical support for a reset password specific to that terminal or completely removing
power from the terminal for a few minutes to reset it.
NOTE:
ATS Setup Mode
Setup Host Connect
