Chapter 3: Monochrome Terminals
ATS Setup Mode
MANU-MAXIMUS-02
Maximus Reference Manual
3-29
Revision-02
4.
Next the terminal displays the
Parity
bit parameter. Press the
enter
key to
accept/set the displayed value or press the
clear
key to scroll between the
O
(Odd),
E
(Even), and
N
(None) options. When finished press the
enter
key to
save the setting and proceed to the next menu item.
5.
Next the terminal displays the
Stop Bits
parameter. Press the
enter
key to
accept/set the displayed value or press the
clear
key to scroll between the
1
, and
2
. When finished press the
enter
key to save the setting and proceed to the
next menu item.
Device Setup
The
Device Setup
parameter enables you to setup the type of biometric fingerscan reader
installed on the terminal.
1.
When the terminal displays the
Device Setup
parameter (typically after the
Setup Comm Port
) press the
enter
key to access the device setup parameters
(or press the
clear
key to proceed without configuring a device).
Parity
0
Stop Bits
2
ATS Setup Mode
Device Setup
