3-28
Maximus Reference Manual
MANU-MAXIMUS-02
Revision-02
ATS Setup Mode
Chapter 3: Monochrome Terminals
Setup Comm Port
Set the communication port connection for terminals that use a serial connection. These
settings must match the communication software and hardware you are using to connect to
the terminal.
1.
When the terminal displays the
Setup Comm Port
menu (typically after the
Setup Smartcard
parameter) press the
enter
key to access the comm port
parameters (or press the
clear
key to proceed without configuring the comm
port).
2.
If you pressed the enter key the first comm port parameter (
Select Baud Rate
)
appears enabling you to set the baud rate for the port. Press the
enter
key to
accept/set the displayed value or press the
clear
key to scroll between the
1200
,
4800
,
9600
,
19200
,
38400
,
57600
,
115200
baud (bps) options. Press the
enter
key when the terminal displays the desired option to set the option and proceed
to the next menu item.
3.
Next the terminal displays the
Data Bits
parameter. Press the
enter
key to
accept/set the displayed setting or press the
clear
key to scroll between
7
, and
8
. Press the
enter
key when the terminal displays the desired option to set the
option and proceed to the next menu item.
ATS Setup Mode
Setup Comm Port
Select Baud Rate
4800
Data Bits
7
