Asus R300, User Manual

Page: 78 / 192

If via points exist, tap and tap again any of the fields to see the time needed to reach the
first, second, etc. via point.
Estimated Arrival
This is an estimated value that can also be displayed in one of the Route data fields on
the Cockpit screen as ‘ETA to destination’. It shows the estimated arrival time at the final
destination of the route based on information available for the remaining segments of the
route. The calculation cannot take into account traffic jams and other possible delays.
If via points exist, tap and tap again any of the fields to see the estimated arrival at the first,
second, etc. via point.
Destination / Via point
This field shows the exact address (or its coordinates if the address is not available) of the
final destination.
If via points exist, tap and tap again any of the fields to see the address or coordinates of the
first, second, etc. via point.
Warning icons
The following 5 squares are normally grey. Some of them turn red and show a graphical
symbol in case warning(s) are attached to the planned route. These are warnings, so icons
always show information for the whole route, even if the data fields display values from your
current position to a via point only.
Click on any of the icons to show its description.
A few samples of the available icons: