Asus R300 User Manual Download Page 118

Page: 118 / 192

Your options are:
• Recalculate: ASUS GO will recalculate the route with the previous settings. The result is the

same as if Automatic recalculation was selected.
• Drop Next Via Point / Delete Route:ASUS GO will remove the next via point from the list and

recalculate the route without it. If you have only one target left, the label of the button will be

Delete Route, and it will end navigation.

• Bypass: if you have deviated from the original route because of a traffic jam or roadworks,

you can instruct ASUS GO to avoid the original route for a specified distance.

• Cancel: you can exit without recalculating the route. Navigation stops and will be activated

again when you find your way back to the original route.

Disabled
If you stick to the original route, and you wish to get back to it on your own, you can disable

recalculation. This way guidance will stop until you return to the recommended route on your

own.

.. Map settings

You can set a few parameters determining the appearance of the maps in ASUS GO.

Summary of Contents for R300

































































































































































































Search results

Summary of Contents for R300

Reviews:

Related manuals for R300

Brands by name

Popular brands

Asus R300, User Manual

Search results

Summary of Contents for R300

Reviews:

Related manuals for R300

Brands by name

Popular brands