Asus R300, User Manual

Page: 137 / 192

1
Off-route sensitivity
This is a range of relative values from 0 to 10, telling ASUS GO how far the GPS position
should be from the recommended route before the program decides to recalculate. Lower
values make ASUS GO insensitive to position errors; higher values will result in quicker
reactions.
Recalculation delay
This is a setting that helps suppress the effects of position fluctuation. With a few seconds
delay in recalculation even large position jumps can be survived without a need for route
recalculation.
U-turn penalty
You can fine-tune the way ASUS GO takes U-turns into account when planning a route. You
can tell ASUS GO how much extra distance you would travel to avoid a U-turn.
Note: This value is taken into account only if U-turns are enabled in Route Parameters .
Cross-border planning
By default ASUS GO plans routes using the border crossing points. However, if you live near
the border, you can disable border crossing with this switch to remain within one country.
Carpool lanes (for the USA map only)
You can instruct ASUS GO to use carpool lanes when planning routes. These lanes are
currently available in the USA only.
This control only appears on the screen when the USA map is available in the product.