Asus R300 User Manual Download Page 28

Page: 28 / 192

.1 Warnings and safety information

ASUS GO is a navigation system that helps you find your way to your selected destination.

It will determine your exact location with the help of the built-in GPS device. The position

information obtained from the GPS receiver will not be transmitted anywhere, so others will

not be able to track you by the help of this program.
If you are the driver of the vehicle, we recommend that you operate ASUS GO before

beginning your journey. The driver’s attention should always be on the road. Plan your route

before departure and pull over if you need to change route parameters. ASUS GO has a

built-in (optional) Safety Mode that will prevent you from using the screen functions if your

car is in motion. Unless a passenger will be the only one to operate ASUS GO, we strongly

encourage you to turn on the Safety Mode.
It is also important that you look at the display only if it is absolutely safe to do so.

You should always observe traffic signs and road geometry before you obey any instruction

from ASUS GO. If you need to deviate from the recommended direction, ASUS GO will

suggest a modified route according to the new situation.

Never place the PNA where it can obstruct the view of the driver, is within the deployment

zone of airbags, or where it can cause injuries in case of an accident.

For further information, please consult the End User License Agreement.

Summary of Contents for R300

































































































































































































Search results

Summary of Contents for R300

Reviews:

Related manuals for R300

Brands by name

Popular brands

Asus R300, User Manual

Search results

Summary of Contents for R300

Reviews:

Related manuals for R300

Brands by name

Popular brands