Asus R300 User Manual Download Page 138

Page: 138 / 192

Keep position on road (Lock-on-Road)
ASUS GO is normally used for vehicle navigation, therefore Lock-on-Road will display the

position arrow precisely over roads, seamlessly correcting small GPS errors. For pedestrian

use you may consider disabling Lock-on-Road to make ASUS GO always show your exact

position.

Note: By turning off Lock-on-Road you also turn off the GPS position error filtering. The

position shown on the map will be subject to all position errors and position fluctuations.

User data management

Everything that was saved (pins, My POIs, Favourites, track logs etc.) or modified (Settings,

History lists) since ASUS GO was installed is stored in a user database located in the

internal memory of the ASUS R300. Here you have options to save, restore or reset the

database or parts of it.

Backup Data

Summary of Contents for R300

































































































































































































Search results

Summary of Contents for R300

Reviews:

Related manuals for R300

Brands by name

Popular brands

Asus R300, User Manual

Search results

Summary of Contents for R300

Reviews:

Related manuals for R300

Brands by name

Popular brands