Asus R300 User Manual Download Page 124

Page: 124 / 192

Vehicle

You can set the type of the vehicle that you will use to navigate the route. Based upon

this setting, some of the road types will be excluded from the route (e.g. motorways for

pedestrians), or some of the restrictions may not be taken into account (e.g. emergency

vehicles have no restrictions).
Furthermore, when Bus or Lorry is chosen, the program assumes that high speeds cannot

be achieved, and this information is taken into account when calculating the route, the

estimated time enroute (ETE), and the estimated time of arrival (ETA).
Available values:
• Car
• Taxi
• Bus
• Lorry
• Emergency
• Bicycle
• Pedestrian

Road types to include/exclude

To let the route fit your needs you can also set which road types are to be considered for or

to be excluded from the route if possible.

Summary of Contents for R300

































































































































































































Search results

Summary of Contents for R300

Reviews:

Related manuals for R300

Brands by name

Popular brands

Asus R300, User Manual

Search results

Summary of Contents for R300

Reviews:

Related manuals for R300

Brands by name

Popular brands