Asus R300, User Manual

Page: 68 / 192

Sound muting (No. 1)
By tapping this button you can quickly mute all sounds of the PNA. This will not modify the
volume level and the enabled or disabled status of the voice guidance or the key sounds
(all to be set on the Sound Settings screen, just mutes the sound output. When muting is
enabled, the speaker icon is crossed out.
Tap again to re-enable sounds.
Note: Sound can be muted in Sound settings, too. There you have a Master switch that
works together with the switch described above. There is also a Master slider on that screen.
That you can use to fully turn down the volume of the device. Setting the volume low is
different from muting, therefore it will not show up on the mute indicator.
Track Log recording/playback indicator (No. 1)
When a track log is being recorded, a red icon is displayed on the map screens. This icon
also functions as a button leading to the Track Log screen (Page 48) where you can stop the
recording or make the track log visible on the map.
During track log playback a green icon will blink. Tapping this icon (in fact, tapping the
screen anywhere) stops the simulation.