Asus R300 User Manual Download Page 4

Page: 4 / 192

Safety Notices

Before using the device, carefully read the safety information below. When using the device, always

follow the safety precautions to avoid any accident, personal injury or property damage due to improper

operating.

- Configure the device settings before driving. Do not configure it while driving.

- The navigation may not be always in accordance with the actual locations and it’s for your

reference only.

- The map may not be exact the same with the actual locations and it’s for your reference only.

- It is the user’s responsibility to observe safe driving practice and the local laws of driving.

- Avoiding exposing the device to high temperature for long time. Mount the device in a cool

dry place when it is not in use.

- While parking, keep the satellite navigation function enabled to ensure the satellite searching

accuracy.

- Do not open or remove the internal components by yourself or by unauthorized engineers.

ASUS is not responsible for any device damage caused by the above situations.

- Avoid pressure that may damage the internal components.

- Use qualified battery only.

- Protect the display from scratch. Use fingers or a stylus to write on the screen.

- Do not apply any chemical when cleaning the display

- Mount the device in a dry place and avoid environments where it may get wet.

- Remove the charger and power off the device before cleaning it.

- Shut the main power on the bottom of the device and contact your technical support staff

immediately in the following situations:
-  power cable is damaged,
-  cover panels break, and
-  the device is exposed to water or rain

Summary of Contents for R300

































































































































































































Search results

Summary of Contents for R300

Reviews:

Related manuals for R300

Brands by name

Popular brands

Asus R300, User Manual

Search results

Summary of Contents for R300

Reviews:

Related manuals for R300

Brands by name

Popular brands