Asus R300, User Manual

Page: 135 / 192

1
Turn this switch on if you want ASUS GO to return to your current GPS position after you have
moved the map during navigation. This is useful if you have moved the map accidentally, or if
you have moved it to quickly check something near your route.
After a certain timeout set below, the Follow button disappears, and the map immediately
jumps back to show your current position.
Restore Smart Zoom
Use this switch if you want ASUS GO to re-enable Smart Zoom after zooming or tilting the
map during navigation. This is useful if you have changed the view accidentally, or you
modified it to quickly check something near your route.
After a certain timeout set below, the Follow button disappears, then Smart Zoom changes the
view back for navigation. Unlike with Restore Lock-to-Position, the view changes smoothly.
Note: Smart Zoom can only be re-enabled when it is activated at the top of this page. With
Smart Zoom turned off, neither does the Follow button appear, nor will the view return to its
previous state if you zoom or tilt the map.
Delay before restoring
You can set the timeout for both Restore Lock-to-Position and Restore Smart Zoom here.
Shorter delays are best if you tend to accidentally change the map display, but you may prefer
a longer delay if you often look for things around your position while driving.
Remember to only look at the display if it is absolutely safe to do so.
Note: If you push the Follow button before the automatic Follow comes into effect, Smart
Zoom and Lock-to-Position will be re-enabled instantly.