Asentria SiteBoss 571 UserManual
Page 81
Return to Normal Event Trap Number
Set the trap number which can be useful when using SNMP trap managers that employ a trap numbering system
to help identify incoming traps. The default trap number for Current Sensor Events is 180, but any number in the
alternate range of 1000
– 1199 can be used.
Return to Normal Event Class
Set the class for the event. When this option is selected, a list of the classes previously defined in the
is displayed, from which you can select one to be assigned to this event.
Fuse Sensor Events
This menu is used to enable the Fuse Sensor and configure event notifications.
SiteBoss 571 - Fuse Sensor Settings for Output 1
Device Number: 200 Device ID: 0C000000 Device Name: INTERNAL
A) Fuse Sensor Enabled [OFF]
B) Event Actions []
C) Return to Normal Actions []
D) Event Class [Info]
E) Return to Normal Class [Info]
F) Event Trap Number [210]
G) Return to Normal Trap Number [210]
H) Active Alarm Alias [BLOWN]
I) Inactive Alarm Alias [OK]
Fuse Sensor Enabled
This is an ON/OFF toggle to enable this sensor.
Event Actions
This option displays the Actions List, a menu where the action string for the event is configured. This field will be
empty [ ] if no actions have been configured, and will show [*SET*] if one or more actions have been configured.
Refer to the
Return to Normal Actions
This option displays the Actions List, a menu where the action string for the event is configured. This field will be
empty [ ] if no actions have been configured, and will show [*SET*] if one or more actions have been configured.
Refer to the
for more information.
Event Class
Set the class for the event. When this option is selected, a list of the classes previously defined in the
is displayed, from which you can select one to be assigned to this event.
Return to Normal Class
Set the class for the event. When this option is selected, a list of the classes previously defined in the
is displayed, from which you can select one to be assigned to this event.
Event Trap Number
Set the trap number which can be useful when using SNMP trap managers that employ a trap numbering system
to help identify incoming traps. The default trap number for Fuse Sensor Events is 210, but any number in the
alternate range of 1000
– 1199 can be used.
Return to Normal Trap Number
Set the trap number which can be useful when using SNMP trap managers that employ a trap numbering system
to help identify incoming traps. The default trap number for Fuse Sensor Events is 210, but any number in the
alternate range of 1000
– 1199 can be used
Active Alarm Alias
Use this field to set a customized name representing the active alarm state, used when reporting active events for
this sensor. The default setting is BLOWN.
