Asentria SiteBoss 571 UserManual
Page 58
Note:
When configuring a new password, the S571 will ask you to re-enter the password. If the second entry
of the password does not match the first, the S571 responds as follows:
Invalid Entry - Confirm Password does not match.
Press any key to continue...
User
n
Setup Menu
Use this menu option to configure log in credentials as well as security access permissions for up to twelve users.
SiteBoss 571 - User Setup Menu
A) Enable This User Access [ON]
B) User Name [admin]
C) Password [********]
D) User Profile Expiration Date/Time []
E) Allow User Connection via [LMTFRSsW]
F) Upon Login then Go To [COMMAND]
G) Set Pass-through Pointer To [I/O 1]
H) Pass-through Permissions
I) After PT, ESC Takes User To [MENU]
J) PPP Connection [ROUTING]
K) Setup/Status Rights [MASTER]
L) File Release Permissions
M) File Delete Permissions
N) Additional Authentication Options
O) Web Login Forwarding Route [1]
Enable This User Access
This is an ON/OFF toggle to enable access for this user profile.
User Name / Password
These options are used to set the username and/or password for this profile (Maximum length for each is 31
chars).
User Profile Expiration Date/Time
This option is used to set a date and/or time that this profile may be automatically disabled. This menu also
provides an option to adjust the current date/time that is on the SiteBoss. Selecting that option will transfer you to
the System
. If left blank, this user profile will not expire. The default setting is blank.
Allow User Connection via
This option displays a menu allowing you to toggle ON or OFF access via Local (Console Port), Modem, Telnet,
FTP, Real-Time Socket, SSH and Web Portal. These are abbreviated: LMTFRSsW and the default setting for all
is ON.
SiteBoss 571 - Allowed User Connection Via
A) Modem [ON]
B) Telnet [ON]
C) FTP [ON]
D) Local [ON]
E) Real Time Socket [ON]
F) SSH [ON]
G) Web [ON]
Upon Login then Go To
This menu selection toggles the action this user will be directed to upon logging in, with the following options:
COMMAND, PASSTHROUGH, MENU, and WEB LOGIN FORWARDING.
The default is COMMAND, which brings you to the command prompt upon login.
