Asentria SiteBoss 571 UserManual
Page 22
This will display an "A" or an "i" for each output. A stands for Active and the i means inactive. The power output
can be controlled via the
Temp
This field displays the current temperature reported by the internal temperature sensor.
Serial Number
The serial number field displays the factory assigned unique serial number for this SiteBoss.
n:
19200,8N1 I/O
n
These fields are a listing of all installed serial ports (except for the Console Port) in order. They display the current
baud rate and parity setting (19200, 8N1) followed by the the target name of the port. This target name is used in
event notifications. The serial port settings can be configured in the
asterisk following the baud rate and parity indicates that there is data stored in the file associated with that port.
Power Distribution Status
The Power Distribution status screen provides information in real time for the current and voltage of both the Main
and individual power outputs. The configuration settings for Power Distribution are configured in the Alarm/Event
Definitions
→ EventSensor Device Settings → INTERNAL →
To view the Power Distribution Status screen, enter the command
?power
(or
?pow
or even
?p
).
>?power
SiteBoss 571 Power Distribution Status for Controller 200
Main Voltage : 48.78 Volts *** Alarm *** 443 minutes
Total Current : 0.372 Amps *** Alarm *** 443 minutes
Total Power : 18 Watts
SiteBoss 571 Current : 0.134 Amps
Power Output
Name State Current Fuse
1 Resistive Load OFF 0.000 Amps OK *** Alarm *** 443 minutes
2 unnamed ON 0.000 Amps OK
3 unnamed ON 0.000 Amps OK
4 unnamed ON 0.000 Amps OK
5 unnamed ON 0.007 Amps OK
6 unnamed ON 0.000 Amps OK
7 unnamed ON 0.001 Amps OK
8 unnamed ON 0.015 Amps OK
9 unnamed ON 0.067 Amps OK
Note:
The screen shot above shows how active power distribution alarms are displayed.
(
*** Alarm *** x minutes)
Note that for each individual power output, if it shows alarm it could be either
the fuse state or the power output current causing the alarm, or both.
Main Voltage
The Main Voltage displays the voltage across the main power bus bars.
Total Current
Total Current displays the total current drawn by the S571 and the devices connected to all of the power
distribution outputs.
Total Power
Total Power displays the total power drawn by the S571 and all of the power distribution outputs (Main Voltage x
Total Current).
SiteBoss 571 Current
SiteBoss 571 Current displays only the current drawn by the S571.
