Asentria SiteBoss 571 UserManual
Page 20
Web Interface
The S571 has a built-in HTTP web server that can be used to configure the unit from anywhere the unit can be
accessed on the network or Internet. This interface is enabled by default. Simply connect to
http://<IP address of
S571>
or
https://<IP address of S571>
to use Secure Sockets Layer (SSL).
Upon connection, you will be greeted by a login screen. Log in with your Login ID (Username) and Password.
These are the same credentials you would use to log into the command prompt.
Once logged in, the Sensors Status screen will be displayed. This is a menu tree on the left side of the display to
configure and control the SiteBoss. Using the menu trees you can alter most of the setting in the same way you
could via the command Interface.
Most pages have sections separated by a colored bar. These sections are collapsible. Double click any bar and
all sections will collapse for ease of handling long pages. A single click will collapse or expand any single section.
This interface can be disabled via the command interface. The configuration options for the Web Interface are
located under the
in the command interface only.
The manual uses CLI screen shots and uses the menu tree from the CLI. However, unless the Web Interface has
been disabled via the Network Settings, it is also available for use to control your SiteBoss unit.
