62
CS175-275-575-875 Installation Guide
Location 3
Account code for phone #1 (six segments, ND)
This location contains the account code sent when phone number 1 is dialled. Each digit
is stored in a different segment.
Program ‘10’ in the segment immediately after the last digit of the account code. Any
numbers after ‘10’ are ignored. If the account code is six digits long, program all six
segments.
Location 4
Communicator format for phone #1 (one segment, ND)
This location contains the communicator format used to transmit to the receiver connected
to phone number 1. Consult the instructions for your central station receiver to determine
which format is compatible. Select a format from the following table. To disable the dialer,
do not program a communicator format for any phone numbers.
If you require a format other than those listed, review the override options described in
location 126 to build the appropriate format. To create a special format, program ‘14’ in
location 4 in addition to the entries in location 126.
Data
Format Description
1
Contact ID
2
SIA
3
SIA with area modifiers
4
Voice dialler
5
Reserved
6
4+2 with 1400/1900 double round parity
7
4+2 with 1400/1900 checksum parity
8
4+2 with 2300/1800 double round parity
9
4+2 with 2300/1800 checksum parity
10
Fast Format 8 channel
11
Fast Format 16 channel
12
Siren Tone
13
Sema phone pager
14
Sema digit pager
15
Format overrides (build your own format)
16
Reserved
17
200 baud FSK (France only)
18
200 baud FSK Reversed (France only)
19
XSIA (Netherlands only)
20
XSIA with area modifier (Netherlands only)
21- 255
Reserved
"
The voice dialer protocol does not generate an FTC (failure to communicate).
Location 5
Events reported to phone # 1 (two segments, FSD)
Segment 1
1
Alarms
2
Alarm restores
