44
CS175-275-575-875 Installation Guide
6. To remove access to a partition, press the partition number on the keypad. The
partition is marked with a hyphen(-) to indicate that the user can no longer access
it. To grant the user access to apartition, press the partition number again.
7. Press
to save the changes. The keypad prompts you to enter another user
code.
8. To edit another user’s authority level, return to step 3. Otherwise, press
#
to exit
without saving your changes.
"
Any master arm/disarm code can add or change a user code if the master code has
access to the same partitions as that code.
When programming user codes for a partitioned system, leave at least one code with
access to all partitions to allow new users to be added. This can be the Go to program
code if it is enabled in Location 55. To allow a user add new codes, remove the partition
authority from all blank codes.
10.2.10
Calling back for download
Press
98
while the system is disarmed to perform a call back for a download.
"
A valid user code may be required after
98
if this option is enabled in Location 53.
See
Location 53
on page 71 for more information.
10.2.11
Seizing the phone line for download
Press
99
while the system is disarmed to make the control panel seize the phone line
for a download.
"
A valid user code may be required after
99
if this option is enabled in Location 53.
See
Location 53 on page 71 for more information.
10.2.12
Programming custom messages
Zone messages may be entered into the LCD one at a time or by downloading.
The custom message lock prevents messages being copied to the selected keypad. This
feature is used frequently when a system is partitioned and the users of one partition have
different messages than users of the other partition. If you do not use the custom
message lock, the messages programmed into the keypad are copied to all other keypads
in the system.
Special Keys
When you are entering custom messages into the LCD keypad, the keys on the keypad
take on different functions to simplify message programming.
*
Star
Press to enter data or move the cursor to the right if no data
is entered.
#
Hash
key
Press to leave the message.
