CS175-275-575-875 Installation Guide
97
Repeater
Press and then release the tamper switch.
16.4.4 Deleting transmitters
The following steps describe how to delete transmitters from the module.
The module ignores a transmitter but does not remove its identification from the module’s
memory. The transmitter can be reactivated later or a new one can be learned into the
zone.
Steps
1. Press
8
to enter programming mode.
2. Enter a Go to Program Code. The keypad prompts you to enter a module number.
3. Enter the module number and press #. The module number is iis the DIP switch
setting, for example 35,36,38 or 39.
4. Press XX# where XX is the zone number (1 to 168) and where # is the entry key.
5. Press 1 to change the transmitter feature 1 (Transmitter Enabled). The first bit in
the segment changes from ‘1’ to ‘-, to indicate that the wireless component is
disabled.
6. Repeat steps 4 to 5 until all transmitters are deleted.
7. Press
the
Exit
key twice to exit programming mode.
16.4.5 Testing wireless transmitters
Use the walktest to test the wireless transmitters.
