CS175-275-575-875 Installation Guide
133
Seg#4
(36)
1
Seg#5
(37)
1
Seg#6
(38)
1
Seg#7
(39)
1
Seg#8
(40)
1
46
Zones 41-48, zone types
1-1-1-1-1-1-1-1
47
Zones 41-48, partition selection (Segment 1=zone 41 to segment 8=zone 48)
Segments
Part#1 Part#2 Part#3 Part#4 Part#5 Part#6 Part#7 Part#8
Seg#1
(41)
1
Seg#2
(42)
1
Seg#3
(43)
1
Seg#4
(44)
1
Seg#5
(45)
1
Seg#6
(46)
1
Seg#7
(47)
1
Seg#8
(48)
1
48
Swinger shutdown count
0
49
Keypad sounder control
Seg#1 (Circle numbers to program)
1
2
3
4
5
6
7
8
Keypad sounds for Telephone Line Cut when in the Armed state.
Keypad sounds for Telephone Line Cut when in the Disarmed state.
Keypad sounds upon Mains Power Failure.
Keypad sounds upon Low Battery Detection.
Keypad sounds during “B” Alarm trip time.
Keypad sounds for Tamper Alarm.
Reserved
Keypad sounds for expander trouble.
50
Siren
options
Seg#1 (Circle numbers to program)
1
2
3
4
5
6
7
8
Siren sounds for Telephone Line Cut while armed.
Siren sounds for Telephone Line Cut while disarmed.
Siren blast at arming.
Siren blast at exit delay expiration.
Siren blast at closing kissoff.
Siren sounds for expander trouble.
Siren sounds for a tamper.
Siren blasts one time for keyswitch or wireless arming, two times for disarming.
Seg#2 (Circle numbers to program)
1
2-8
Convert siren driver to voltage out.
Reserved
Seg#3
Reserved
51
System
options
Seg#1 (Circle numbers to program)
1
2
3
4
5
6
7
8
On: delay zone restores until siren timeout.
On: enable battery presence test (every 10 seconds).
On: Dynamic Battery test performed at arming.
On: manual bell test enabled.
On: manual communicator test enabled.
On: box tamper input enabled.
On: clock uses internal crystal.
On: disable temporal siren on fire.
Seg#2 (Circle numbers to program)
