Applied Biosystems 3730xl User Manual Download Page 17

Page: 17 / 170

Computer and software requirements

Computer/software

Requirement

Computer

IMPORTANT!

Do not modify the instrument hardware or software without notifying

Thermo Fisher Scientific. Any modifications must be made by Thermo Fisher Scientific

under change control.

The computer provided with the instrument contains validated software and settings.

Do not change the static IP settings.
For minimum computer requirements, see “Instrument specifications“ on page 142.

IMPORTANT!

Do not rename the computer after the 3730xl Data Collection Software

5 is installed. The instrument computer has been assigned a unique name. Changing

the name may cause the software to malfunction.

Because of the Ethernet cable connection between the instrument and the computer,

the computer must be located within 9 feet of the instrument.

IMPORTANT!

The instrument communicates with the computer by Ethernet

connection. Do not make any changes to the computer ethernet/internet connections

during a run or during calibration.

Operating system

Operating system: Windows

™

10 Enterprise 2016 LTSB, 64-bit (requires 5 partitions)

Consult with a Thermo Fisher Scientific representative before updating the Windows

™

operating system or firewall settings.

Instrument firmware

Instrument firmware is to be updated only by a Thermo Fisher Scientific representative.

Antivirus software

requirements

No antivirus software is provided with the Data Collection software. The following

applications are compatible with the software:

• Symantec Endpoint Protection 12
• McAfee Endpoint Security version 10.5
• Windows Defender Antivirus (comes as part of the Windows

™

10 installation)

Other software

CAUTION!

Do not install additional software on the computer other than

antivirus software. Changes to the configured software could void the

instrument warranty and cause the instrument software to be non-operational.

Theory of operation

When DNA samples are prepared for sequencing and fragment analysis on the

instrument, fluorescent dyes are attached to the DNA.

Preparing

samples

Chapter 1

Instrument and software description

Computer and software requirements

3730xl DNA Analyzer with 3730xl Data Collection Software 5 User Guide

Summary of Contents for 3730xl











































































































































































Search results

Summary of Contents for 3730xl

Reviews:

Related manuals for 3730xl

Brands by name

Popular brands

Applied Biosystems 3730xl, User Manual

Search results

Summary of Contents for 3730xl

Reviews:

Related manuals for 3730xl

Brands by name

Popular brands