manualshive.com logo in svg

Applied Biosystems 3730xl, User Manual

Share
Download
Applied Biosystems 3730xl User Manual Download Page 66

Status

Description

Autosampler

Processing

Data is being collected from the plate.

Current runs

Collecting

Injection is in process.

Validated

Injection has been validated and will be run.

Table 4   

Current Run fields

Field

Description

Run ID

The internal number assigned by the software

Application

Instrument protocol type selected in the instrument

protocol

Run protocol

Instrument protocol name selected in the plate record

2.

Monitor the System status indicator in bottom left of screen.

•

—Instrument is running

•

 flashing—Check the Event Log.

See “View the Event Log“ on page 68 or “Display the Event Log“ on

page 135.

•

—Instrument has stopped

Add reinjections to a plate record

To add a reinjection, edit the plate record, then run the plate again.

1.

In the navigation pane of the Data Collection Software, double-click   GA

Instruments

4

 ga3730

4

 Plate Manager.

2.

Select a plate record, then click Edit.

3.

Select Edit

4

Add Sample Run.

Columns for Results Group 2 and Instrument Protocol 2 are added to the plate

record.

4.

Specify the settings for the new injection.

Chapter 5 

Run the instrument

Add reinjections to a plate record

5

66

3730xl DNA Analyzer with 3730xl Data Collection Software 5 User Guide

Summary of Contents for 3730xl











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands