Applied Biosystems 3730xl User Manual Download Page 115

Page: 115 / 170

Monthly maintenance

Task

Frequency

Run the Water Wash wizard (see “Typical conditions for using maintenance

wizards“ on page 117).
Flush the array port during the Water Wash wizard, whether or not bubbles are

present in the array port.

Monthly or as needed

Check disk space (see “Check available disk space on E: drive“ on page 131 ).

Monthly

As-Needed maintenance

Task

Frequency

Clean the drip tray.

As needed

Change the capillary array using the Install Array wizard (see “Typical conditions

for using maintenance wizards“ on page 117).

As needed

Remove any dried polymer from the capillary tips. Use a lint-free wipe moistened

with deionized water.

As needed

Chapter 9

Maintenance

Maintenance schedules

3730xl DNA Analyzer with 3730xl Data Collection Software 5 User Guide

115

Summary of Contents for 3730xl











































































































































































Search results

Summary of Contents for 3730xl

Reviews:

Related manuals for 3730xl

Brands by name

Popular brands

Applied Biosystems 3730xl, User Manual

Search results

Summary of Contents for 3730xl

Reviews:

Related manuals for 3730xl

Brands by name

Popular brands