Applied Biosystems 3730xl User Manual Download Page 41

Page: 41 / 170

Seal and assemble plates

WARNING!

Do not use warped or damaged plates.

Seal the plate with a heat-seal or septum.

Option

Description

Heat seal

Follow your thermal sealer instrument instructions.

Septum

seal

1. Place the plate on a clean, level surface.
2. Place a new septum flat on the plate.
3. Align the holes in the septum strip with the wells of the plate, then

firmly press downward onto the plate. Ensure that the septum is

seated and aligned (see Figure 8).

• The septa lie flat against the plate. You should not feel any lumps

or raised edges.

• The septa are inserted straight into the wells. You should not see

any bent or crooked duckbills when viewing the plate from above.

Figure 8

Examples of bad and good septa alignment

Septum and well are not aligned

Septum and well are properly aligned

Seal and prepare

the plate

assemblies

Chapter 2

Prepare the instrument

Seal and assemble plates

3730xl DNA Analyzer with 3730xl Data Collection Software 5 User Guide

Summary of Contents for 3730xl











































































































































































Search results

Summary of Contents for 3730xl

Reviews:

Related manuals for 3730xl

Brands by name

Popular brands

Applied Biosystems 3730xl, User Manual

Search results

Summary of Contents for 3730xl

Reviews:

Related manuals for 3730xl

Brands by name

Popular brands