174
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
To choose the output A/V mapping mode:
Front Panel
1.
Enter the
AUDIO
menu on the Front Panel interface.
2.
Scroll down and select
A/V Mapping
to access the A/V mapping menu.
3.
Select
Mode
and choose the output A/V mapping mode:
•
Select
DIRECT ROUTING
to use a specifically set audio source (A/V mapping by audio source
selection);
•
Select
FOLLOW MAPPING
to follow the A/V mapping of the input selected at runtime (A/V
mapping by video source selection).
Remark:
In follow mapping mode, the audio may change when selecting inputs.
TIP:
•
In
Follow mapping mode
, scroll down and select an input to edit the input A/V mapping (
SEE: A/V mapping
inputs
).
•
In
Direct routing mode
, select
Video Src. (eAUDIO)
to select the output A/V mapping source (audio
embedded in video stream source selection).
Available audio stream sources include:
NONE
No audio
INPUT 1
Embedded audio in input DisplayPort
INPUT 2
Embedded audio in input HDMI on Back panel
INPUT 4
Embedded audio in input Optical
INPUT 5
Embedded audio in input SDI
INPUT 6
Embedded audio in input DVI-D
INPUT 7
Embedded audio in input HDMI on front panel
Web RCS
1.
Go to the
Setup
menu on the Web RCS interface.
2.
Click on the
AUDIO
tab to access the audio management page.
3.
In the left side toolbar, select
General
to access the audio inputs and outputs setup page.
4.
Under
Audio Outputs
(middle window), choose the output A/V mapping mode:
•
Select
DIRECT ROUTING
to use a specifically set audio source (A/V mapping by audio source
selection);
•
Select
FOLLOW MAPPING
to follow the A/V mapping of the input selected at runtime (A/V
mapping by video source selection).
Remark:
In follow mapping mode, the audio may change when selecting inputs.
TIP:
•
In
Follow mapping mode
, scroll down and select an input to edit the input A/V mapping (
SEE: A/V mapping
inputs
).
•
In
Direct routing mode
, select
Video Src. (eAUDIO)
to select the output A/V mapping source (audio
embedded in video stream source selection).
