Analog way V701 User Manual Download Page 103

Page: 103 / 237

103

www.analogway.com

PROGRAMMER’S GUIDE

USER MANUAL

The input plug status provides information on the current input plug configuration.

Available plug status information includes:

CONFIGURATION:

•

Type:

Current input signal type/color space.

List of possible input signal types (analog plugs):

SDTV COMPOSITE

Composite signal 0-700mV

SDTV YC

Y/C signal 0-700mV

VIDEO RGBS

RGBs signal with a TTL composite synchro (only video
format)

VIDEO RGSB

RGB signal with synchro on green (SOG) (only video
format)

VIDEO YUV

YUV signal 0-700mV

COMPUTER SOG

RGB signal with synchro on green (SOG)

COMPUTER BW

Only Green signal with synchro (SOG) converted to grey
level

COMPUTER HV

RGB signal with separate TTL H/V synchro

COMPUTER

TTL

COMPOSITE

RGB signal with a TTL composite synchro

COMPUTER

ANA

COMPOSITE

RGB signal with an analog composite synchro

List of possible input color spaces (digital plugs):

AUTO

Automatic color space selection

YUV

YUV (YCbCr ITU-R BT.601 or YCbCr BT.709)

RGB FULL (0-255)

RGB Full scale (0-255)

RGB LIMITED (16-235)

RGB Limited scale (16-235)

•

HDCP Detection:

(DisplayPort, HDMI and DVI-D plugs only) HDCP compliance enabled/disabled.

•

Plug:

Plug selection enabled/disabled.

STATUS:

•

Format:

Detected input format/standard.

•

HDCP:

HDCP compatibility status for the input plug.

•

Audio:

Embedded audio detected in the digital video signal.

•

Audio Type:

Type of audio signal (/!\ only PCM is supported).

•

Audio Sampling Rate:

Audio sampling frequency (in kHz).

•

Audio Copyright:

•

Module Detected:

Indicates if a module is detected.

7.5.2.1

Checking the plug status

Summary of Contents for V701














































































































































































































































Search results

Summary of Contents for V701

Reviews:

Related manuals for V701

Brands by name

Popular brands

Analog way V701, User Manual

Search results

Summary of Contents for V701

Reviews:

Related manuals for V701

Brands by name

Popular brands