155
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
To create a frame capture in an external USB drive:
Front Panel
1.
Enter the
FRAME
menu on the Front Panel interface.
2.
Select
Capture
to access the create frame capture menu.
3.
Select
Destination type > FILE
to create the new frame capture as an external USB drive file.
4.
Select
Select directory
to browse folders in the USB drive if required.
5.
Select
File format
to change the new frame capture file format if required.
6.
Select
File creation mode
to change the file creation mode if required.
Available file creation modes include:
INCREMENTAL
Increase the file number when capturing the same stream
OVERWRITE
Overwrite the file
7.
Select
Capture from
to choose the video source for the capture.
NOTE:
You can choose to capture the active input or the output.
8.
Select
Start the capture
when ready to create a new frame capture as an external USB drive file.
Web RCS
1.
Follow the steps described in
Creating a frame capture in the library
.
2.
Export the new capture to a USB drive as described in
Exporting frames from the library
.
Frames can be used to transition through frame when switching sources.
The transition through frame is then performed in 3 steps of equal duration:
1.
Fade transition from the initial source to the chosen frame;
2.
Frame display;
3.
Fade transition from the frame to the new source.
The
VIO 4K
allows you to preset two frames to transition through frame in the screen, and quickly select
either preset frame to transition through frame when switching sources.
8.5
Using frames as transitions
