105
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
•
Link Rate:
(DisplayPort plug only) Link rate.
List of possible DisplayPort link rates:
RBR
RBR (1.62Gbps)
HBR
HBR (2.7Gbps)
HBR2
HBR2 (5.4Gbps)
•
Module Detected:
Indicates if a module is detected.
•
ID:
ID of SFP module.
•
Bitrate:
SFP module nominal bitrate.
•
Vendor Name:
SFP module vendor name.
•
Module Status:
SFP module support status.
•
Standard:
(Optical and SDI plugs only) Detected SDI standard.
List of possible SDI standards:
SD-SDI
SD SDI standard
HD-SDI
HD SDI standard
3G-SDI LEVEL A
3G SDI Level A standard
3G-SDI LEVEL B
3G SDI Level B standard
6G UHD-SDI*
6G SDI standard
12G UHD-SD*
12G SDI standard
(*) Available with the optional video card
To check the status of an input plug:
Front Panel
1.
Enter the
INPUTS
menu on the Front Panel interface.
2.
Scroll down and select an input to access the selected input setup menu.
TIP:
Double-click on an
INPUT SELECTION
button to shortcut to the input setup menu directly.
3.
Select the plug settings to access the input plug settings menu.
4.
Select
Status
to check the input plug status.
5.
If required, rotate the
control knob
clockwise to scroll the page and see further status information.
Web RCS
1.
Go to the
Setup
menu on the Web RCS interface.
2.
Click on the
INPUTS
tab to access the inputs setup page.
3.
In the left side toolbar, select an input to access the selected input setup page.
4.
Select the
Signal
tab to access the plug settings page.
5.
Under
STATUS
, check the status of the input and plug.
6.
If required, click on the
Show details
button to access further status information.
