94
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
The
VIO 4K
allows you to enable the loop mode of an output plug to loop-through your inputs, for example
to connect an additional device or for local monitoring.
The following table illustrates the
VIO 4K
loop-through capabilities of each plug:
Output plug
Looped input plug
HDMI, DVI or both
HDMI or DVI
Analog (HD15)
HD15
Other
None
NOTE:
•
When loop mode is
enabled
, the video signal is automatically passed from the input to the output plug without scaling or
additional processing. The corresponding output plug thus becomes an unscaled loop of the selected input and it is no longer
available as a standard scaled output.
•
HDMI
and
DVI
loops share the same hardware resources. This means both the HDMI and DVI output plugs will be affected when
enabling loop mode and will display the same looped input signal.
•
On
SDI
plugs, the loop capability is directly implemented in the hardware (SEE: Rear panel description).
To enable loop mode on an output plug:
Information:
No audio will be transmitted.
Front Panel
1.
Enter the
OUTPUTS
menu on the Front Panel interface.
2.
Select
STANDARD OUTPUT
to access the standard output setup menu.
3.
Select
Plug Settings
to access the plug setup menu for the output.
4.
Select a plug to access the selected plug setup menu.
5.
On
Analog (HD15) plugs
, check the
Enable Loop of Input 3 (HD15)
box to loop HD15 input plug
through HD15 output plug (uncheck to disable).
6.9
Enabling loop mode
