106
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
The easiest way to select the signal type for a plug is to auto-detect the signal type on the sources connected
to the plug. If the auto-detected signal type does not seem right, you can always force the signal type to use
on the plug.
To auto-detect the signal type on a plug:
NOTE:
•
If displayed, the input may flicker.
•
The input plug may change temporarily.
Front Panel
1.
Enter the
INPUTS
menu on the Front Panel interface.
2.
Scroll down and select an input to access the selected input setup menu.
TIP:
Double-click on an
INPUT SELECTION
button to shortcut to the input setup menu directly.
3.
Select
Plug Settings
to access the plug settings menu for the selected input.
4.
Select
Autoset
to start the signal auto-detection process:
•
Select
YES
to confirm.
•
Select
NO
to cancel the action.
7.5.2.2
Selecting the signal type
