228
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
TIP:
Use the
Quick Setup
button (located at the bottom of the Web RCS interface) to manage HDCP on all input
plugs.
To enable/disable HDCP on an output plug:
NOTE:
•
With HDCP enabled (default), the HDCP encryption is maintained whether the screen is compliant or not.
•
With HDCP disabled, all screens are seen as non-HDCP compliant.
Front Panel
1.
Enter the
OUTPUTS
menu on the Front Panel interface.
2.
Select
STANDARD OUTPUT
to access the standard output setup menu.
3.
Select
Plug Settings
to access the plug setup menu for the output.
4.
Select a plug to access the selected plug setup menu.
5.
Check the
HDCP Detection
check-box to enable the HDCP negotiation on the output plug (uncheck
to disable).
TIP:
Go to the
CUSTOMIZE
menu and select
HDCP Manager
to manage HDCP on all input plugs.
Web RCS
1.
Go to the
Setup
menu on the Web RCS interface.
2.
Click on the
OUTPUTS
tab to access the outputs setup page.
3.
In the left side toolbar, select
STANDARD OUTPUT
to access the standard output setup page.
4.
Disable the
Hide all plugs
button if required to show the output plugs.
5.
Click on the
Show plugs settings
button to access the plug settings for each output plug.
6.
Locate the plug to set up.
7.
Check the
HDCP
check-box to enable the HDCP negotiation on the output plug (uncheck to disable).
