137
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
•
Uncheck
3:2 Pulldown
to disable the detection of 3:2 sequences for 59.94Hz/60Hz interlaced
formats.
Web RCS
1.
Go to the
Setup
menu on the Web RCS interface.
2.
Click on the
INPUTS
tab to access the inputs setup page.
3.
In the left side toolbar, select an input to access the selected input setup page.
4.
Select the
Image
tab to access the input image settings page.
5.
Under
DEINTERLACER
, uncheck
Low Latency
to disable low latency.
NOTE:
Disabling low latency will add an extra frame latency.
6.
If required, uncheck the
2:2 Pulldown/3:2 Pulldown
check-boxes to optimize the progressive image
reconstruction process:
•
Uncheck
2:2 Pulldown
to disable the detection of 2:2 sequences for 50Hz interlaced formats.
•
Uncheck
3:2 Pulldown
to disable the detection of 3:2 sequences for 59.94Hz/60Hz interlaced
formats.
The image settings of an input are automatically recalled via the input settings memory when the input meets
all the following characteristics:
•
Source number (either input number or matrix source number);
•
Line and line sync widths;
•
Frame and frame sync widths;
•
H and V sync polarities.
You can however reset all image settings without erasing the input settings memory.
7.5.3.8
Resetting the image
