Analog way V701 User Manual Download Page 92

Page: 92 / 237

www.analogway.com

PROGRAMMER’S GUIDE

USER MANUAL

To freeze the output:

Front Panel

Press the

Freeze

SHORTCUT

button to freeze the output (click again or select another input to

unfreeze).

Web RCS

Go to the

Edit

menu on the Web RCS interface.

Click on the

Freeze

button at the bottom of the screen to freeze the output (click again or select

another input to unfreeze).

SEE: Creating frame captures

The Genlock input can be used as a reference and a rate multiplier to set up the output format (SEE:

Setting

up the format

If the Genlock input allows it, you can further specify the format to use on the Genlock reference input by
choosing from the list of formats detected on the Genlock input.

6.7

Capturing the output

6.8

Using the Genlock reference

Summary of Contents for V701














































































































































































































































Search results

Summary of Contents for V701

Reviews:

Brands by name

Popular brands

Analog way V701, User Manual

Search results

Summary of Contents for V701

Reviews:

Brands by name

Popular brands