Bridge Mode Configuration Utility Pages
70
NXA-WAP200G Wireless Access Point
Administration Page (BM) Information (Cont.)
Security
User Name
This is the User Name that must be entered when logging into the configuration
utility pages.
• To change the User Name simply type in a new User Name.
Administrator Password
This is the password that must be entered when logging into the configuration
utility pages.
• To change the password simply type in a new password. Then, type it again
in the second field to confirm.
Save/Cancel
• Press the
Save
button to incorporate the information to the WAP200G.
• Press the
Cancel
button to terminate the process of altering these fields.
Commands
Reboot Bridge
• Pressing the
Reboot
button allows you to reboot the WAP and incorporate
any recent changes.
Reset factory Defaults
• Pressing the
Reset
button restores the WAP to its original factory default
settings.
Note:
All settings you entered for the SSID, WAP, User Name, Password, etc.
will be erased and you will need to reconfigure the unit to your settings.
Upgrade Firmware
This section of the Administration page focuses on locating any recently
downloaded firmware and upload it to the target WAP200G.
• The latest NXA-WAP200G Firmware can be found at AMX's product support
page (
http://www.amx.com/dealer-support.asp
).
• Download the firmware file to a known location on your hard-drive.
• After the file has successfully downloaded, use the
Browse
button to locate
and select the downloaded firmware.
• Press the
Upload
button to update the firmware to the target WAP200G.
Note:
You MUST be connected via Ethernet in order to properly upgrade the
on-board firmware. If you are connected wirelessly while trying to upload the
firmware, you will get a generic error message on the top portion of the
Administration page.
FIG. 54
Administration page
Summary of Contents for Modero NXA-WAP200G
