AMX Modero NXA-WAP200G Page 3 Instruction Manual Download | Manualshive

Page: 3 / 82

background image

FCC Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received; including interference that may cause undesired operation.

Federal Communications Commission (FCC)
Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy, and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

•

Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement

This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed an operated with a minimum
distance of 20 centimeters between the radiator and your body.

«
1
2
3
4
5
...
»

Summary of Contents for Modero NXA-WAP200G



















































































Reviews:

No comments

Related manuals for Modero NXA-WAP200G

Brand: BEC Pages: 18

DECT 1615 Series

Brand: Uniden Pages: 28

Brand: Aruba Pages: 2

Brand: Ebyte Pages: 27

Brand: VKOM Pages: 20

Brand: Cranberry Pages: 2

7000AP - Air Xpert - Wireless Access Point

Brand: D-Link Pages: 8

Brand: Canon Pages: 7

Brand: Samsung Pages: 6

Brand: Samsung Pages: 38

Brand: Air Live Pages: 9

OfficeConnect OC20

Brand: HPE Pages: 4

Brand: HPE Pages: 4

Brand: Luxul Pages: 8

Brand: Ebyte Pages: 38

Brand: Link Play Pages: 24

Brand: Ebyte Pages: 22

Brand: Digitus Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands