AMX Modero NXA-WAP200G, Instruction Manual, Page: 56 / 82

AP/Repeater Configuration Utility Pages
50
NXA-WAP200G Wireless Access Point
Connected Devices Page
This page can be accessed by pressing the Connected tab from the top row of the Configuration
Utility. This page provides a list of MAC Addresses from the devices that are communicating to
this target WAP200G. To view a current list of devices, click the Refresh button below the MAC
Address listing. The fields in the Connected Devices page (FIG. 40) are described in the table
below.
Status Page Information (Cont.)
Current Wireless: These values are configured through the Basic Wireless Configuration
Page section on page 51.
Wireless Mode • Displays the wireless operation mode for the WAP.
Wireless Network Name
(SSID) • Displays the SSID for the WAP200G.
Channel • Indicates which wireless channel is currently being used.
WEP • Displays the current setting for WEP as either enabled or disabled .
Default is Disabled.
WPA • Displays the current setting for WPA as either enabled or disabled .
Default is Disabled.
Country/Regulatory Domain • Displays the country where this transmission is occurring.
FIG. 39 Status page
Connected Devices Page Information
MAC address list: • A listing of unique MAC Addresses for any devices currently communicating
to the target WAP200G.