manualshive.com logo in svg

AMX Modero NXA-WAP200G, Instruction Manual, Page: 16 / 82

Share
Download
AMX Modero NXA-WAP200G Instruction Manual Download Page 16

WAP200G Accessories

10

NXA-WAP200G Wireless Access Point

NXA-WAP2410A 10 dBi Directional Yagi Antenna

This antenna can be used as bridge between two networks and/or point-to-point communications. 

This design also provides improved front-to-back ratio and sidelobe suppression (reducing 

interference). It features a robust mounting structure for consistent performance, regardless of 

weather conditions. The NXA-WAP2410A antenna (FIG. 8) is field adjustable for vertical or 

horizontal polarization with matched principal plane beamwidths (providing optimum performance 

in either orientation).            

FIG. 8  

NXA-WAP2410A Outdoor Enclosed Yagi Antenna

Specifications for NXA-WAP2410A 

Dimensions (L & OD)

:

• 4.5" L x 3.0" OD (114 mm x 76 mm)

Description:

• 10 dBi Directional Yagi Antenna (@ 2.4 GHz).

Features:

• 10 dBi directional antenna.

• A 30 dB front-to-back ratio permits less physical separation on the tower, thus 

adding mounting flexibility at installation sites where space is limited.

• Attractive weather-proof radome is constructed of UV resistant material. This 

construction provides robust and trouble-free use in harsh outdoor 
environments.

• Field adjustability allows for both vertical or horizontal polarity. This feature 

eliminates co-channel interference from neighboring radiators.  

• Includes a robust mast mount bracket which is designed to withstand up to 

125 mph winds.

• Matched principal plane beamwidths provide excellent sidelobe suppression 

and cross-polarization rejection of more than 20 dB.  

• Provides superior signal quality (with enhanced gain performance) and 

minimal interference from neighboring radiators.

• Polarity markings are molded onto the antenna and ensure installation in the 

correct orientation.

• Small and unobtrusive 4.5" x 3" design enables a user to bridge any two 

buildings without compromising the architecture.

Weight:

• 1.0 lbs (0.5 kg)

Equivalent Flat Plate Area:

• 0.060 ft

2

Wind Survival:

• 125 mph (201.17 kph)

Lateral Thrust at 
 Rated Wind:

• 5.8 lbs (2.63 kg)

Max Power:

• 5 Watts

Front view

Rear view

Summary of Contents for Modero NXA-WAP200G



















































































Reviews:

No comments