Ametek 933S, Operator'S Manual

Page: 177 / 288

Maintenance and Troubleshooting
|
6-1
MAINTENANCE and TROUBLESHOOTING
This chapter discusses preventive maintenance to keep the analyzer
sample system operating at peak efficiency, how to check for plugging in
the analyzer sample system, and how to replace internal parts. This chap-
ter also discusses how to view alarms (errors) that can be used to diagnose
and troubleshoot problems with the analyzer.
Safety Considerations
Before working on the analyzer, read the entire procedure you
will be performing to learn how to safely perform maintenance
on and troubleshoot the analyzer.
Before performing any maintenance, service, or troubleshooting on the
analyzer, review and follow all safety information under “Personnel
and Equipment Safety Information” following the Table of Contents.
This information describes procedures to follow to avoid personal
injury and/or damage to the equipment.
All regulatory agency and
personnel safety procedures for your jurisdiction must be fol-
lowed.
Personnel should be thoroughly familiar with the operation of the
analyzer before performing the maintenance procedures described in
this chapter.
To prevent an explosion, test the area around the analyzer for explo-
sive gases and proceed with maintenance only when the area is found
to be safe (nonhazardous).

NOTE
!
WARNING

NOTE