Ametek 933S, Operator'S Manual

Page: 93 / 288

Installation and Start-Up | 3-47
To change the hold times:
1. From the Status tab, click to uncheck the Conc. Alarm Soft Enable On/
Off button to temporarily Disable the Concentration Alarms.
2. View the Column Timing dialog box (Figure 3-23) and enter the new
Hold Time for the species of interest. Click OK then Apply . Save the
change to EEPROM.
3. return to the Status tab and click to check the Conc. Alarm Soft En-
able On/Off button to Enable the Concentration Alarms. Click OK .
The Hold Time for species not mentioned should be set to that of H
2
S.

NOTE

Setup (tab)

Output

Setup (tab)

Column
Timing