CP-3000 User’s Guide
6-5
Weekly Program
Possible reasons for this error message are:
The time card setting has been changed in
Program Mode.
Duplicate times have been scheduled in the
Weekly Program.
You must perform a Reset (Clear All) to reset to the default card type
and clear the
Weekly Program
.
Overheat Protection
To prevent overheating of the card feed and printing motors and a quick
and high discharge of the battery, the CP-3000 is provided with an
internal counter for the number of imprints. When you print too many
times within a short time period, the recorder will refuse to accept new
cards, beep, and may display the following error message:
If this occurs, please take the time card out of the card throat and wait
for several minutes.
Err 6 thru Err 9
These error messages will remain in the display until the problem is
resolved and the CP-3000 is restarted by pressing any key with the
message in the display. When displayed, the time and date will be
maintained (unless your AC power is disconnected) as in normal mode
and no programming data will be lost.
Card Stuck
This error occurs when a non-standard time card shape is used or the
time card is forced into the card throat. In either case, the time card
sensors detect the presence of the time card, but the unit is unable to
flush out the card. The time card has to be removed manually to resolve
this problem.
Summary of Contents for CP-3000
