CP-3000 User’s Guide
3-5
Bottom Margin (Bm) Adjustment
Step 1
.
If you have not already done so, enter
the
Program Mode
and press the
FUNCTION
key until the
Time Card
menu item appears in the display.
Step 2
.
Press the
NO
key to select the
Bottom
Margin Adjustment Password
of “9”.
Step 3
.
When the correct value appears in
thedisplay, press the
YES
key. A
password confirmation display will
appear. If the value in the display is
correct, press the
YES
key.
Step 4
.
The
Bottom Margin
menu item will
appear. Press the
NO
key to change the
flashing value in the display. Acceptable
values are from 01 to 31 in increments of
0.01” (0.25 mm). When the correct value
appears, press the
YES
key.
Step 5
.
Exit the
Program Mode
and insert a time
card into the card throat to test.
Note:
This feature is only for
small
variations.
Card Thickness Adjustment
The CP-3000 is factory set for a time card thickness of 0.0126” (0.32
mm). It can be adjusted for time cards with a thickness of 0.0079” to
0.0197” (0.2 mm to 0.5 mm).
To set the card thickness, perform the following steps:
Step 1
.
Disconnect the power cord from the power source.
Step 2
.
Remove the top cover.
Step 3
.
Set the
Mode Switch
to
PROGRAM
.
Step 4
.
Remove the front case.
Step 5
.
Disconnect the battery.
Step 6
.
Card thickness is adjusted by turning the white dials (on both
sidesof the printer platen) to the thickness of the card.
Clockwise rotation of the dials narrows the gap and
counterclockwise rotation widens the gap. One click of each
dial is .0024” (0.06 mm)
Summary of Contents for CP-3000
