![background image](http://html.mh-extra.com/html/amano/cp-3000/cp-3000_user-manual_2918126014.webp)
2-4
CP-3000 User’s Guide
Wall Mounting
For proper wall mounting follow these steps:
Step 1
. Disconnect the power cord from the power source.
Step 2
. Unlock and remove the top cover.
Step 3
. Remove the two screws on the top and slide the back
platedownward to remove it. Set the CP-3000 face up on a flat
surface.
Step 4
. Using a punch, knock out the center material from the
teardropmounting hole on the back plate.
Step 5
. Using the back plate as a template, approximate the final
locationof the clock, and mark the location of the teardrop
mounting hole on the wall.
Step 6
. Hang the back plate on a screw or anchor from the
teardropmounting hole.
Step 7
. Level the back plate and mark the location of the bottom
twomounting holes.
Step 8
. Secure the back plate to the wall by inserting screws through
thebottom two mounting holes.
Step 9
. Holding the sides of the cover, lift the CP-3000, bottom forward,
to the back plate.
Step 10
. Align the tabs on the bottom of the CP-3000 housing with the
grooves in the bottom flange of the back plate. Hold the CP-
3000 in place so that the tabs are even with the bottom flange.
Do not rest the unit on the flange.
Summary of Contents for CP-3000
