6-14
CP-3000 User’s Guide
EPROM Test
Step 1
.
If you have not already done so,
enterthe
Program Mode
and press
the
FUNCTION
key until the
LED
Test
menu item appears in the
display.
Step 2
.
Press the
NO
key four times. The
Eprom Tes
t menu item will appear
in the display.
Step 3
.
Press the
YES
key to select and
start the test. The test number will
cease to flash in the display, and
the first LED indicator (on the left
side of the front panel) will
illuminate. After three seconds, the
first LED will turn off, the second
LED will illuminate and the size of
the Eprom will be in the display.
Step 4
.
Press the
YES
key to stop the test. A
beep will sound and the test number will
flash in the display.
Step 5
.
Press the
NO
key to move to the next test
or exit the
Diagnostics
menu by pressing
the
FUNCTION
key, or by exiting the
Program Mode
.
Buzzer Test
Step 1
.
If you have not already done so, enter
the
Program Mode
and press the
FUNCTION
key until the
LED Test
menu
item appears in the display.
Step 2
.
Press the
NO
key five times. The
Buzzer
Test
menu item will appear in the display.
Step 3
.
Press the
YES
key to select and start the
test. The test number will cease to flash
in the display, and the
Buzzer
will sound
for a maximum of eight beeps.
Summary of Contents for CP-3000
