Amano CP-3000, User Manual

Page: 17 / 76

CP-3000 User’s Guide
2-7
Step 9 . Observing polarity, insert one wire into the CP-3000 through the
knockout hole and connect it to the proper terminal position of
CN7A . Using a screwdriver, secure the wire in place. Insert the
other wire into the unit and secure in place. Make sure that only
the stripped wire is clamped, and not the insulation.
Step 10 . Check the connections by tugging on each wire. If they
appearloose, repeat the previous step.
Step 11 . Clamp the signal wires as shown in the following drawing using
a cable clamp appropriate toyour cable thickness.
Connecting the Battery
The CP-3000 is equipped with a Full Power Reserve Battery that will
maintain normal operations for 72 hours or 300 punches, in the event of
an AC power failure. This battery is disconnected at the factory to
prevent damage during shipping and must be connected for the CP-3000
to operate.