Amano CP-3000, User Manual

Page: 67 / 76

CP-3000 User’s Guide
6-11

Printer or printer carriage is damaged. Contact your local Amano
dealer.

The slider on the printer carriage is not moving correctly due to a
missing black plastic bushing in the small hole of the right printer
frame. Contact your local Amano dealer.

The ribbon cassette is not seated correctly in the printer carriage.
Reinstall the ribbon cassette.

Run the Color Change Test in the Diagnostics menu.

Printer or printer carriage is damaged. Contact your local Amano
dealer.
Weak or Light Printing
Please refer to Printing or Ribbon Error Message, Err1 section of this
chapter for troubleshooting weak or light printing problems.
Diagnostics
The Diagnostics menu is used to run specific diagnostic routines for
troubleshooting and determining the condition of your CP-3000.
The Diagnostics menu is accessed by entering the Program Mode , and
pressing the FUNCTION key until the LED Test menu item appears in
the display and the last LED indicator is illuminated.
The general guidelines for the Diagnostics menu are as follows:

Each test is indicated by a specific number (refer to the
Programming Guide ) flashing in the display.

To select and start a test, press the YES key.

To stop a test press the YES key again. A beep will sound and
the test number will flash in the display.

Press the NO key to move to the next test.

Press the FUNCTION key to leave the Diagnostics menu.