4-20
CP-3000 User’s Guide
Step 5
.
If you have programmed one or more
Weekly Programs
,
insert another time card (or the reverse side of the one used in
step 4) to obtain a printout. Up to sixteen
Weekly Programs
are printed on a card.
Step 6
.
To stop printing at any time, press and hold either the
NO
or
YES
key. Only the currently inserted time card will be printed
on, and the remainder of the programming data will not be
printed.
Step 7
.
When printing is completed, the display will automatically
move tothe next menu. Exit the
Program Mode
by setting the
Mode Switch
to
NORMAL
.
Editing Weekly Programs
Step 1
.
Obtain a printout of the current
Weekly Programs
.
Step 2
.
Mark on the printout the desired
Weekly Program
that you
want to change.
Step 3
.
Enter the
Program Mode
and press the
FUNCTION
key until
the
Weekly Program
menu item appears in the display.
Step 4
.
Press and hold the
YES
key until the desired program number
appears. To move to previously numbered
Weekly Programs
,
press and hold the
NO
key.
Step 5
.
Change the
Weekly Program
as desired. For the changes to
be in effect, you must cycle through the sequence of displays,
and save the data entered.
Summary of Contents for CP-3000
