![background image](http://html.mh-extra.com/html/amano/cp-3000/cp-3000_user-manual_2918126038.webp)
4-8
CP-3000 User’s Guide
Note:
After saving the date, the LED indicator on the front panel will
automatically adjust to the correct day of the week when
switched to
NORMAL
.
Hours and Minutes
Note:
To set the hours and minutes, you must cycle through the
following sequence of displays and save the data entered. The
data entered will not be saved if you exit the
Program Mode
or
press the
FUNCTION
key before saving.
Note:
All time programming is done in 24 hour time format, even if the
time is displayed in 12 hour time format. The default time format
for the display in
NORMAL
mode is also 24 hour format. If you
wish to change the time format for the display, you must do so
in the
Hours Display
menu item.
Step 1
.
Set the
Mode Switch
to the
PROGRAM
position, if you have not already done
so. The
Year
menu item will
automatically appear in the display.
Step 2
.
If applicable, press the
YES
key until the
Hours and Minutes
menu item appears
in the display with the first pair of digits
(hour) flashing.
Step 3
.
Press the
NO
key until the correct hour
(in 24 hour format, 00 thru 23) is flashing
in the display. Holding down the
NO
key
for more than three seconds will
increment the number in the display by
ten.
Step 4
.
When the correct hour appears, press
the
YES
key. The second pair of digits,
minutes, will begin to flash.
Step 5
.
Press the
NO
key until the correct
minutes (00 thru 59) appear in the
display. Holding down the
NO
key for
more than three seconds will increment
the number in the display by ten.
Step 6
.
When the correct minutes appears in the
display, press the
YES
key.
Summary of Contents for CP-3000
