![background image](http://html.mh-extra.com/html/amano/cp-3000/cp-3000_user-manual_2918126062.webp)
6-6
CP-3000 User’s Guide
Insufficient Power
This message is displayed when there is not enough power from the AC
power supply to start up the feed or print motors. To resolve this error,
perform the following:
Check the condition of the fuses, replace if necessary
Check the connections and condition of the battery.
Re-initialize the unit and charge the battery by allowing the unit
to be connected to AC power and stand idle for 24 hours. If this
message still occurs, replace the battery.
The normal life-span of the battery used is three to five years. If it
falls outside of that range, you should replace the battery.
Blank Display
When this condition occurs, the CP-3000 will also emit a continuous
beep. If possible, perform the
LCD Test
in the
Diagnostics
menu. If this
condition persists, contact your local Amano dealer.
EPROM
If this message is displayed, please contact your local Amano dealer.
Summary of Contents for CP-3000
