Introduction
A programmable controller is used to switch the heating system and/or the hot
water in your home on and off as needed. It works by controlling the central
heating and/or the hot water with programmed settings that take eff ect at
diff erent times of the day.
Product Compliance
EU Directives: 2014/30/EU, 2014/35/EU and 2011/65/EU.
Safety Information
Use in accordance with the EU and national regulations.
For indoor use only.
Keep your device completely dry. This product must be installed by a competent
person and in accordance with all the EU and national regulations.
Always isolate the AC Mains supply before installing or working on any
components that require 230 VAC 50Hz supply.
Thank you for purchasing the
22-23015 Single Channel Digital Time
Clock
for 230 V.
22-23015 Single Channel Digital Time Clock
CH or HW
Installation
Input: 230V, 50Hz
Output: 3A/ switch terminal
Terminal
Description Backplate
N
Mains Neutral
L
Mains Live
1
Not Used
2
Not Used
3
Volt Free Connection
4
Volt Free Connection
Earth Parking
(
no electrical connection
)
N L 1 2 3 4
N L 1 2 3 4 5 6
Jumper Settings
Changes to the jumpers settings should
only be made by the Engineer carrying out
the installation or other qualifi ed person.
The installer should select the jumper
positions required if changes need to
be made to the factory default settings.
These jumpers are found on the rear of the
controller.
* P - Fully pumped system for independent Central Heating and Hot Water.
* G - Gravity Hot Water system with Pumped Central Heating.
22-23015 Switching Bridges
Switch
Program
5-2 days programme or
24h programme
Fully pumped system(P*)
or gravity-fed hot water
system(G*)
Disable/enable the internal
backup battery
System
Feature
22-23015 Settings
Memory
Backup
5-2
OFF
NA
First Power Up
Button Function
Backlight/
Holiday
Mode
+1Hr
Down
Up
Select
Set
Reset
1. Turn on the LCD backlight
2. Press for 3 sec to activate Holiday mode
Select operating mode (ON, ONCE, AUTO, ADV, OFF)
Activate/deactivate Boost function
Decreases the selected setting
Increases the selected setting
Select a clock or programme setting
Sets a clock or programme setting
Reset to Factory settings
MODE
SELECT
SET
+HR
MODE
+Hr
SELECT
SET
<
<
MODE
+Hr
SELECT
SET
<
<
Setting date and time
3 sec
Choose your clock format
and press Select.
Press and hold the indicated
buttons together for 3 sec.
Single Channel Digital Time Clock
for 230V
Model: 22-23015
The Single Channel Digital Time Clock is recommended for users that
want to control only the Central Heating or the Hot Water system.
Multipipe Ltd
Unit 12 Great Ha
yes Business
Park
Low
er Burnham R
oad
Stow M
aries
Chelmsfor
d
Essex
CM3 6SQ
Sales
T: 01245 227630
.uk
Technical
T: 01245 850799
E: technical@multipipe
.co.uk
ww
w.multipipe
.co.uk
INSTALLER MANUAL
