Amano CP-3000, User Manual

Page: 23 / 76

CP-3000 User’s Guide
3-1
Chapter 3: Time Cards
Making a Test Print
Follow these steps to make a test print:
Step 1 . Make sure that there is power to the CP-3000, and the Mode
Switch is set to NORMAL .
Step 2 . Gently insert a time card into the card throat. The card will
automatically be fed in, printed and ejected. Do not force it in or
attempt to pull it out before it has been ejected.
Step 3 . As shipped, the CP-3000 is configured to print the following
imprint:
Step 4 . If this imprint is acceptable, and is correctly positioned on your
time card, the CP-3000 is ready to be programmed for use (time
and date). If time card adjustments must be made refer to the
following sections in this chapter. If you wish to change the style
of the imprint, you must program an imprint style for your
application in addition to setting the time and date for your CP-
3000. Please refer to the
Basic Programming section of
Chapter 4 to set year, time, and date imprints.